Any candidate who applies for registration as a Professional Engineer must:
- Be registered as a Graduate Engineer with BEM.
- Have satisfied the training requirements of BEM.
- Have passed the Professional Assessment Examination (PAE) of BEM or be elected as a Corporate Member of the Institution of Engineers Malaysia (IEM).
- Have been residing in Malaysia for a period of not less than six months immediately prior to the date of application.
| PROCEDURES FOR REGISTRATION |
- All application shall be made through MyBEM Online Registration System or manually using Form B1.
- The following doucuments must be uploaded together (in pdf format) to support your online application;
- Practical Experience using Company/Department's letterhead, which has been signed by a Professional Engineer in the same discipline.
- Copy of Letter of Approval of Professional Assessment Examination or copy of MIEM certificate certified true copy by a Professional Engineer.
- Copy of degree.
- Copy of Letter of Approval as Graduate Engineer with the BEM.
- Copy of Identity Card.
- Passport-sized photo (in jpg format, not more than 100kb).
- All candidate are required to pay a registration fee of RM350.00.
- Upon approval, a certificate of Professional Engineer registration (Form D1) will be issued.
- For manual application, you need to download and complete the Application Form B1. Submit the form together with copies of your supporting documents and a registration fee of RM350.00.
A registered Graduate Engineer is required under Section 10(1)(b) of the Act to obtain practical experience in order to be entitled to sit for the Professional Assessment Examination (PAE) which is a prerequisite to apply for registration as a Professional Engineer.
The candidate shall carry out the practical experience in the following manner as prescribed in Regulation 22(1) of the Registration of Engineers Regulations 1990:
The practical experience that a registered Graduate Engineer is required to obtain under section 10 (1) (b) of the Act in order to be entitled to apply for registration as a Professional Engineer shall be carried out in a manner satisfactory to the Board for a period of three years –
- in the planning, design, execution or management of such works as comprised within the profession of engineering;
- in engineering research; or
- in the teaching in a course leading to a qualification in engineering research; or in the teaching in a course leading to a qualification approved by the Board, and at least one Year of such practical experience shall be obtained in Malaysia under the supervision of a registered Profession Engineer of the same discipline or an approved allied discipline and shall be in fields of engineering practice other than in research or teaching.
- This period of training in a local environment is greatly emphasized by BEM as it is of paramount importance for the prospective Professional Engineers to be familiar with the local conditions and by - laws so that they can comply and practise effectively in Malaysia.
- Notwithstanding the above, regulation 22(2) stipulates that if the Board is satisfied for sufficient cause or reason, the Board may in any particular case exempt either wholly or partly the requirements as to the practical experience required to be obtained in Malaysia or the requirement as to the supervision by a registered Professional Engineer in Malaysia; provided that the total practical experience to be obtained shall not be less than three years.
- Where there is no Professional Engineer of the same or allied discipline as the candidate in the organisation in which the candidate is working, he may seek the approval from BEM to obtain a Professional Engineer from outside his organisation to supervise his training.
- After the candidate has completed the required prescribed training, he may apply to sit for the Professional Assessment Examination conducted by BEM.
|
No comments:
Post a Comment